The Eleaf iStick Pico 75W starter kit is one of the best kits on the market. It is not hard to use, yet offers some of the most advanced vaping technology to date. Beings that it is an Eleaf product we know the quality and built on it are top of its class. This article will give an in-depth analysis of the product by looking at its pros, cons, and product specifications. We will also give a quick overview on how to use it and some comparable products.
Using the 18650 battery this mod provides constant power, 75W, 2ml tank, and more making this the perfect kit for someone who is just getting into vaping. Couple this with a few different vaping modes and you have yourself an impressive starter kit. Let's take a look at what exactly the Eleaf iStick Pico 75W is all about.
What is the Eleaf iStick Pico 75W Starter Kit
It is an all in one vaping starter kit, that comes with nearly everything you need to get vaping. The 18650 batteries are not included and e-liquid is not included so be sure to pick some up with your brand new Eleaf iStick Pico. It has the capability to run up to 75W and as low as 1W. Another equally impressive feature of the Pico is the fact that it has upgradeable firmware. This means that through the Micro USB port you can plug it into your computer and you can keep your firmware upgraded.
Besides the amazing mod itself, you get the state of the art Melo III Mini sub-ohm tank that can hold up to 2ml of liquid. This tank is compatible with a number of coil structures such as Atlantis, cCell, and Triton. This tank in its own right is an amazing product, with adjustable airflow and a clean look that helps keep the attention on your mod.
Inside the box, you'll get the Kanthal .3 ohm vape coil that is preinstalled and a Kanthal .5 ohm vape coil. The .3 coil is rated from 30-80W and the .5 ohm coil is rated 30-100W so both fall within the acceptable range for the Eleaf iStick Pico 75W. ProVapor offers a wide variety of coils including the Eleaf iStick Pico coils. Make those coils last as long a possible by following these simple rules.
How to Use the Eleaf iStick Pico 75W Starter Kit
Now that we know a bit about the Eleaf iStick Pico 75W Starter Kit lets take a look at how to actually use the device. We will break it down in a simple step by step instructions on how to use your device.
Steps
Make sure you choose the correct 18650 batteries. Note: ProVapor does not currently sell the correct model of 18650 batteries for the Eleaf iStick Pico 75W. Your batteries must be flat on the top and not button top in order to fit in the device.
- Locate all the pieces, the extra coil, the Melo III tank, the extra O-rings…etc.
- Screw off the battery cap located at the top of the device
- Insert one high grade 18650 battery into the device with the positive side down.
- Now make sure to prime the coil, in order to prime the coil take the pre-installed which is in the Melo III and drop a few drops of your favorite e-liquid into the opening of the coil.
- Now reattach the tank and install the tank onto the mod.
- From this point fill up your 2ml tank with the desired amount of e-liquid.
- Allow your device to sit for about 10 minutes to ensure the coil has been properly primed.
- You can now use your device. Use the fire located near the top to start Vaping. Of course with this device, there is a multitude of different vaping modes and ways to change the Wattage.
Dentaba Shop has one of the best guides to better help you understand these modes and how they change the overall vaping experience.
As far as generally using the Eleaf iStick Pico that is it, a simple device that has all the features you'd expect in a starter kit with the options to change between various vaping modes.
Specifications of the Eleaf iStick Pico 75W
The Eleaf iStick Pico has a variety of specifications that can be used to enhance the overall vaping experience. We will first touch upon the various modes of vaping.
Modes
The first mode is VW mode: this mode allows you to change the wattage of your device using the buttons on the bottom to increase and decrease the wattage. This range will support coils that can go from .1 ohm to 3.5 ohms. In order to rapidly increase or decrease the wattage just hold the button for long periods of time.
The second mode is Bypass mode: this mode allows coil resistance from .1 ohm to 3.5 ohms as well. This is a direct voltage system that allows for direct voltage from the battery. This means the higher the battery level the higher the output voltage which can result in better flavor and more vapor production.
The last mode we will talk about is TC-NI/TC-TI/TC-SS/TCR(M1, M2, M3) Mode: Simply put when you switch into this mode you have more temperature control over your vaping experience. This mode also allows you to vape with Nickel 200, Titanium, and Stainless Steel 316 coils. The range on these coils needs to be kept within .05 ohm and 1.5 ohms. Take a look at the link listed above to learn more about these modes.
More Specifications
As mentioned earlier the Eleaf iStick Pico 75W also comes with the Melo III tank which has a 2ml capacity and comes with the .3 ohm kanthal coil preinstalled. Kanthal coils are some of the best coils in the vaping industry and they will provide constant hits that don't give that burnt taste until they are truly burnt out. As mentioned earlier the firmware is also upgradable meaning that you can stay up to date whenever eleaf releases new firmware for their devices. With a 200F-600F temperature rating, you can have a completely different vaping experience all the time. Vaporizing the liquids at different temperatures allows you to vape at your ultimate vaping "sweet spot"
Pros
- Powerful device
- 1-75W
- Highly customizable
- Comes with a great tank and coils already installed
- Can use your favorite e-liquid
- Easy to use
- Multiple settings to vape exactly how you want to vape
- 2ml tank capacity
- Wide range for temperature settings
- Hidden adjustable airflow
- Easy to read bright OLED Screen
- A fun kit for first time vapers that has plenty of options for you to learn and mess around with
- Can use with and without Nicotine
Cons
- A bit bulky, while it is one of the smaller full-size mod starter kits it is significantly larger than a vape pen
- Not as easy to carry
- Only goes to 75W, some devices can far surpass this range
- Other mods provide more features, but more costly
Final Word
ProVapor gives this product a 9/10 rating, while it is not perfect it is one hell of a vaping device. It gives you the power you need for great flavor and amazing flavor production. If you want to see some amazing brands that give great flavor production check them out here. This device is comparable to Kangertech Cupti 2 which is rated at 5W-80W. The Kangertech Cupti 2 is similar in power and has similar features when compared to the Eleaf iStick Pico. It does have a larger tank (5ml) and can be used for sub-ohm vaping. The look and feel are similar to that of the Eleaf but is a bit more expensive. Go with the Kangertech if tank capacity matters to you.
To sum it up the Eleaf iStick Pico is a great device for people who are just getting into vaping. While it is simple to use it comes with a bunch of features the higher line of vaping products has for a fraction of the price. This product is small and packs a punch for its size. While not necessarily pocket-sized, it is still an amazing product. We suggest using these ejuices/e-liquids if you want superior cloud performance. We hope you guys enjoy it as much as we do at ProVapor.
